View PG2415T6X-15_8844152.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2010 description the pg2415t6x is a gaas mmic spdt (s ingle p ole d ouble t hrow) switch for 0.05 to 6.0 ghz applications, including dual-band wireless lan. this device operates with dual control switching voltages of 2.7 to 3.3 v. this device can operate at frequencies from 0.05 to 6.0 ghz, with low insertion loss and high isolation. this device is housed in a 6-pin plastic tson (t hin s mall o ut-line n on-leaded) (t6x) package and is suitable for high-density surface mounting. features ? switch control voltage : v cont (h) = 3.0 v typ. : v cont (l) = 0 v typ. ? low insertion loss : l ins = 0.45 db typ. @ f = 2.5 ghz : l ins = 0.55 db typ. @ f = 6.0 ghz ? high isolation : isl = 28 db typ. @ f = 2.5 ghz : isl = 26 db typ. @ f = 6.0 ghz ? handling power : p in (0.1 db) = +31.0 dbm typ. @ f = 2.0 to 6.0 ghz ? high-density surface mounting : 6-pi n plastic tson (t6x) package (1.5 1.5 0.37 mm) applications ? dual-band wireless lan etc. ordering information part number order number package marking supplying form pg2415t6x-e2 pg2415t6x-e2-a 6-pin pl astic tson (t6x) (pb-free) g6e ? embossed tape 8 mm wide ? pin 1, 6 face the perforation side of the tape ? qty 3 kpcs/reel remark to order evaluation samples, pleas e contact your nearby sales office. part number for sample order: pg2415t6x data sheet caution although this device is designed to be as robust as possible, esd (electrostatic discharge) can damage this device. this device must be protected at all times from esd. static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions must be employed at all times. the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. 0.05 to 6.0 ghz spdt switch gaas integrated circuit pg2415t6x document no. pg10797ej01v0ds (1st edition) date published march 2010 ns printed in japan
pin connections and internal block diagram pin no. pin name 1 rf1 2 gnd 3 rf2 4 v cont 2 5 rfc (top view) (bottom view) 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 (top view) g6e rf1 gnd rf2 v cont 1 v cont 2 rfc 6 v cont 1 remark exposed pad : gnd sw truth table v cont 1 v cont 2 rfc-rf1 rfc-rf2 high low on off low high off on absolute maximum ratings (t a = +25 c, unless otherwise specified) parameter symbol ratings unit switch control voltage v cont +6.0 note v input power p in +36 dbm operating ambient temperature t a ? 45 to +85 c storage temperature t stg ? 55 to +150 c note ? ?
electrical characteristics (t a = +25 c, v cont (h) = 3.0 v, v cont (l) = 0 v, z o = 50 , dc blocking capacitors = 8 pf, unless otherwise specified) parameter symbol test conditions min. typ. max. unit insertion loss 1 l ins 1 f = 0.05 to 0.5 ghz note 1 ? 0.35 ? db insertion loss 2 l ins 2 f = 0.5 to 2.0 ghz note 2 ? 0.40 0.65 db insertion loss 3 l ins 3 f = 2.0 to 2.5 ghz ? 0.45 0.70 db insertion loss 4 l ins 4 f = 2.5 to 3.8 ghz ? 0.55 0.80 db insertion loss 5 l ins 5 f = 3.8 to 6.0 ghz ? 0.55 0.80 db isolation 1 isl1 f = 0.05 to 0.5 ghz note 1 ? 30 ? db isolation 2 isl2 f = 0.5 to 2.0 ghz note 2 25 28 ? db isolation 3 isl3 f = 2.0 to 2.5 ghz 25 28 ? db isolation 4 isl4 f = 2.5 to 3.8 ghz 25 28 ? db isolation 5 isl5 f = 3.8 to 6.0 ghz 22 26 ? db return loss 1 rl1 f = 0.05 to 0.5 ghz note 1 ? 20 ? db return loss 2 rl2 f = 0.5 to 2.0 ghz note 2 15 20 ? db return loss 3 rl3 f = 2.0 to 2.5 ghz 15 20 ? db return loss 4 rl4 f = 2.5 to 6.0 ghz 10 15 ? db 0.1 db loss compression p in (0.1 db) f = 0.5 to 2.0 ghz note 2 ? +32.0 ? dbm input power note 3 f = 2.0 to 6.0 ghz ? +31.0 ? dbm f = 0.5 to 2.0 ghz note 2 ? +36.0 ? dbm 1 db loss compression input power note 4 p in (1 db) f = 2.0 to 6.0 ghz ? +35.0 ? dbm 2nd harmonics 2f 0 f = 2.5 ghz, p in = +20 dbm ? 80 ? dbc 3rd harmonics 3f 0 f = 2.5 ghz, p in = +20 dbm ? 80 ? dbc input 3rd order intercept point iip 3 f = 2.5 ghz, p in = +20 dbm ? +60 ? dbm switch control current i cont no rf input ? 0.1 10 a switch control speed t sw 50% ctl to 90/10% rf ? 50 250 ns notes 1. dc blocking capacitors = 1 000 pf at f = 0.05 to 0.5 ghz 2. dc blocking capacitors = 56 pf at f = 0.5 to 2.0 ghz 3. p in (0.1 db) is the measured input power level when the insert ion loss increases 0.1 db more than that of the linear range. 4. p in (1 db) is the measured input power level when the insert ion loss increases 1 db more than that of the linear range. caution it is necessary to use dc bl ocking capacitors with this device. the value of dc blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and th e condition with actual board of your system. data sheet pg10797ej01v0ds 3 pg2415t6x
evaluation circuit v cont 1 v cont 2 rf1 rf2 rfc c1 note c1 c1 1 000 pf 1 000 pf 4 5 6 3 2 1 note c1 : 0.05 to 0.5 ghz 1 000 pf : 0.5 to 2.0 ghz 56 pf : 2.0 to 6.0 ghz 8 pf the application circuits and their parameters are for reference only and are not intended for use in actual design-ins. application information l esd c1 c1 c1 switch ? c1 are dc blocking capacitor s external to the device. the value may be tailored to prov ide specific electrical responses. ? the rf ground connections should be k ept as short as possible and connect ed to directly to a good rf ground for best performance. ? l esd provides a means to increase the esd protection on a specific rf port, typically the port attached to the antenna. data sheet pg10797ej01v0ds 4 pg2415t6x
typical characteristics (t a = +25 c, v cont (h) = 3.0 v, v cont (l) = 0 v, z o = 50 , dc blocking capacitors = 8 pf, unless otherwise specified) insertion loss l ins (db) frequency f (ghz) rfc-rf1/rf2 insertion loss vs. frequency 0.0 ?0.2 ?0.4 ?0.6 ?0.8 ?1.0 ?1.2 ?1.4 ?1.6 ?1.8 ?2.0 3.0 6.0 1.0 2.0 4.0 5.0 0.0 v cont (h) = 3.0 v isolation isl (db) frequency f (ghz) rfc-rf1/rf2 isolation vs. frequency 0 ?10 ?20 ?30 ?40 ?50 3.0 6.0 1.0 2.0 4.0 5.0 0.0 v cont (h) = 3.0 v return loss rl (db) frequency f (ghz) rfc return loss vs. frequency 0 ?5 ?10 ?15 ?20 ?25 ?30 ?35 ?40 3.0 6.0 1.0 2.0 4.0 5.0 0.0 v cont (h) = 3.0 v return loss rl (db) frequency f (ghz) rf1/rf2 return loss vs. frequency 0 ?5 ?10 ?15 ?20 ?25 ?30 ?35 ?40 3.0 6.0 1.0 2.0 4.0 5.0 0.0 v cont (h) = 3.0 v insertion loss l ins (db) switch control voltage (h) v cont (h) (v) rfc-rf1/rf2 insertion loss, i cont vs. switch control voltage (h) 0 ?0.2 ?0.4 ?0.6 ?0.8 ?1.0 ?1.2 ?1.4 ?1.6 ?1.8 ?2.0 3.0 3.5 2.5 2.0 0.10 0.08 0.06 0.04 0.02 0 switch control current i cont ( a) l ins isolation isl (db) switch control voltage (h) v cont (h) (v) rfc-rf1/rf2 isolation vs. switch control voltage (h) 0 ?10 ?20 ?30 ?40 ?50 8 pf 6.0 ghz f = 2.0 ghz 4.0 i cont (no rf input) 3.0 3.5 2.5 2.0 4.0 6.0 ghz f = 2.0 ghz dc blocking capacitors = 56 pf 8 pf dc blocking capacitors = 56 pf 56 pf dc blocking capacitors = 8 pf 56 pf dc blocking capacitors = 8 pf remark the graphs indicate nominal characteristics. data sheet pg10797ej01v0ds 5 pg2415t6x
2nd harmonics 2f 0 (dbc) 3rd harmonics 3f 0 (dbc) input power p in (dbm) rfc-rf1/rf2 2f 0 , 3f 0 vs. input power ?30 ?40 ?50 ?60 ?70 ?80 ?90 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 return loss rl (db) switch control voltage (h) v cont (h) (v) rfc return loss vs. switch control voltage (h) 0 ?5 ?10 ?15 ?20 ?25 ?30 ?35 ?40 return loss rl (db) switch control voltage (h) v cont (h) (v) rf1/rf2 return loss vs. switch control voltage (h) 0 ?5 ?10 ?15 ?20 ?25 ?30 ?35 ?40 insertion loss l ins (db) input power p in (dbm) rfc-rf1/rf2 insertion loss, i cont vs. input power 40 30 25 3.5 v 5 4 3 2 1 0 switch control current i cont ( a) f = 2.5 ghz l ins i cont 0.1 db loss compression input power p in (0.1 db) (dbm) switch control voltage (h) v cont (h) (v) rfc-rf1/rf2 p in (0.1 db) vs. switch control voltage (h) 38 36 34 32 30 28 26 f = 2.5 ghz output power p out (dbm) 3rd order intermoduration distortion im 3 (dbm) input power p in (1 tone) (dbm) rfc-rf1/rf2 output power, im 3 vs. input power 80 60 40 20 0 ?20 ?40 ?60 ?80 50 65 20 35 55 60 15 2f 0 35 v cont (h) = 2.5 v 3.5 v 3f 0 30 40 p out f = 2.5 ghz 3.0 3.5 2.5 2.0 4.0 3.0 3.5 2.5 2.0 4.0 f = 6.0 ghz 2.0 ghz 6.0 ghz f = 2.0 ghz 0 ?0.2 ?0.4 ?0.6 ?0.8 ?1.0 ?1.2 ?1.4 ?1.6 ?1.8 ?2.0 3.0 v 3.0 v 2.5 v 3.0 3.5 2.5 2.0 4.0 25 45 f = 2.5 ghz im 3 remark the graphs indicate nominal characteristics. data sheet pg10797ej01v0ds 6 pg2415t6x
mounting pad and solder mask layout dimensions 6-pin plastic tson (unit: mm) 0.3 0.5 0.3 0.2 0.3 0.5 0.5 mounting pad 0.3 1.0 solder mask 0.475 0.25 0.475 0.15 0.25 0.5 0.5 0.35 0.55 solder thickness : 0.08 mm remark the mounting pad and solder mask layouts in this document are for reference only. when designing pcb, please consider wo rkability of mounting, solder joint reliability, prevention of solder bridge and so on, in order to optimize the design. data sheet pg10797ej01v0ds 7 pg2415t6x
package dimensions 6-pin plastic tson (t6x) (unit: mm) a a 0.20.1 0.70.1 (bottom view) (top view) 1.50.1 1.50.1 0.37 +0.03 ?0.05 0.08 min. 0.2 +0.07 ?0.05 0.30.07 (0.24) (side view) remark a>0 ( ) : reference value 0.50.06 1.20.1 data sheet pg10797ej01v0ds 8 pg2415t6x
recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recomm ended below, contact your nearby sales office. soldering method soldering conditions condition symbol infrared reflow peak temperature (package surface temperature) : 260 c or below time at peak temperature : 10 seconds or less time at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of reflow processes : 3 times maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below ir260 partial heating peak temperatur e (terminal temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below hs350 caution do not use different soldering met hods together (except for partial heating). data sheet pg10797ej01v0ds 9 pg2415t6x
the information in this document is current as of march, 2010. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. in addition, nec electronics products are not taken measures to prevent radioactive rays in the product design. when customers use nec electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of nec electronics products. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e0904e (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific": data sheet pg10797ej01v0ds 10 pg2415t6x
caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinanc es when disposing of the produc t. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (wit h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industria l waste and household garbage, and ensure that the product is controlled (as industria l waste subject to special c ontrol) up until final disposal. ? do not burn, destroy, cut, crush, or chemically di ssolve the product. ? do not lick the product or in any way allow it to enter the mouth. pg2415t6x
to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation (http://www.renesas.com) send any inquiries to http://www.renesas.com/inquiry.
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas el ectronics products li sted herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by rene sas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electroni cs products or techni cal information descri bed in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyri ghts or other intell ectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any re nesas electronics product, wh ether in whole or in part . 4. descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully re sponsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the proc edures required by such laws and re gulations. you should not use renesas electronics products or the technology described in this docum ent for any purpose relating to mil itary applicati ons or use by the military, including but not l imited to the development of weapons of mass de struction. renesas electronics products and technology may not be used for or incor porated into any products or systems whose manufacture, us e, or sale is prohibited under any applicable dom estic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing th e information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. renesas electronics products ar e classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product de pends on the product?s quality grade, as indicated below. you must check the qua lity grade of each renesas electronics pr oduct before using it in a particular application. you may not use any renesas electronics produc t for any application categorized as ?speci fic? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. re nesas electronics shall not be in any way liable for any damages or losses incurred by you or third partie s arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intende d where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electr onics data sheets or data books, etc. ?standard?: computers; office equipmen t; communications e quipment; test and measurement equipment; audio and visual equipment; home electronic a ppliances; machine tools; personal electronic equipmen t; and industrial robots. ?high quality?: transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specif ically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support device s or systems), surgical im plantations, or healthcare intervention (e.g. excision, etc.), and any other applicati ons or purposes that pose a di rect threat to human life. 8. you should use the renesas electronics pr oducts described in this document within the range specified by renesas electronics , especially with respect to the maximum ra ting, operating supply voltage range, movement power volta ge range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its produc ts, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate a nd malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physic al injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safe ty design for hardware and software in cluding but not limited to redundancy, fire control and malfunction prevention, appropri ate treatment for aging degradation or an y other appropriate measures. because the evaluation of microcomputer software alone is very difficult , please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesa s electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regul ate the inclusion or use of c ontrolled substances, including wi thout limitation, the eu rohs directive. renesas electronics assumes no liability for damage s or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in w hole or in part, without prio r written consent of renes as electronics. 12. please contact a renesa s electronics sales office if you have any questi ons regarding the informat ion contained in this document or renesas electroni cs products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.

▲Up To Search▲

Price & Availability of PG2415T6X-15

	To Download PG2415T6X-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .